Installing plumbing for a tub shower

For optimal comfort, position the faucet about 28 inches above the floor for a tub, and about 48 inches for a shower. Most faucets come with a plastic cover that protects the faucet and serves as a guide for the depth at which it must be set.

If you have other faucet setups, such as a three-handle faucet, it may require that supply pipes be spread farther apart than for a single-handle faucet.

Threaded adapters screw in for the supplies, spout, or shower arm. A faucet with integral shutoffs comes with a large escutcheon cover plate so you can more easily reach the shutoff valves. Determine how high you want to locate the spout make sure it will clear the tub , faucet handles, and showerhead. Install a 2x6 brace for each. Anchor the braces with screws rather than nails so it's easier to move them if they need adjustment. Assemble all the pipes in a dry run.

Add hammer arresters. Anchor the faucet according to manufacturer's directions. Once you are sure of the connections, sweat all the fittings. Start at the faucet, then move on to the shower arm and spout connections. Finger-tighten a threaded nipple—either brass or galvanized—into both drop-ear elbows. Once the wallcovering is in place, remove them and install the shower arm and tub spout.

To plumb a bathtub, shower, and faucet, then you'll need to consider the water coming into your bathtub, not just out of it. Follow the steps above to connect the drain and the steps below to connect the plumbing bringing hot and cold water in. Freestanding bathtubs give a natural feel of luxury but can seem complicated to plumb yourself. The truth is that they're actually really easy. Clawfoot bathtubs are trendy right now.

They're essentially the same as freestanding bathtubs; they just have feet on the bottom to improve the look and feel. To plumb a clawfoot bathtub, you'll pretty much need the follow the same steps taken for a freestanding bath but with a few key differences. If you do not wish to do this job yourself then we recommend getting a local plumber to do the job. You can find free quotes from your area by filling in the form below. Yes, but make sure you have the right tools and equipment.

You may also need a friend to help you move the old bathtub and install the new one. Bathtubs should typically last years depending on the amount of use it gets.

It's possible to install a bathtub in a few days, but it can take longer if you're less experienced. You should anchor your bathtub by drilling two holes above the studs in the lip of the bathtub and screwing it into place.

Plumbing a bathtub can be a daunting task even for experienced DIYers. There are many different components involved, but if you break it down and take it step by step, it's actually not too challenging.

Hopefully, this guide has given you everything you need to plumb your bathtub yourself, and you have the confidence to try it yourself. He has a passion for tools, learning new skills and fixing the everyday problems that arise around the house. Search for:. Instance 1. Water Supply Pipes. Diverter Pipes. Shut-Off valves. Planar Cross. Overflow Control. Considerations Before Installing or Replacing a Bathtub.

Bathroom Size. Maintenance Requirements. Bathtub Drain Rough-In. Locating the Drain Line. The drain hole should be at least 12 inches from the wall and typically inches wide, so you have enough room to plumb your drain and your trap The position of your drain will be influenced by the style of your bathtub.

Plumbing Rough-In. Plumbing A Bathtub Drain. Plumbing A Freestanding Bathtub. Plumbing A Clawfoot Bathtub. People also Ask FAQs. Can you install a bathtub yourself? Install the arm carefully on the designated spot and tighten screws with a screwdriver. Attach the parts of the arms according to the instructions given. Image Source: Pinterest Now you need to attach the hose. It comes with a couple of gaskets.

One gasket goes into the angle shower, and the other goes into the showerhead side. Connect the one end of the hose to the supply elbow. You can do this with a wrench. The other end of the hose goes to the showerhead side. Secure the hose there as well but do not overtighten it. Image source: Plumbing-deals.

To start, remove the plastic cups from the valve. Now install the backing plate on the wall. You may need to add some adhesive or some screws.

The procedure varies based on the faucet. After installation, apply some sealant all around the gasket. Do all the assembling according to the given instructions and finish off by sliding on the faceplate.

The last part includes fitting the handle onto the thread and hand tightening it. Now your faceplate will securely hold to the wall. Once you are done with your installation, turn on the water supply.

Examine closely for any leaks and do the tightening immediately. A small leak can quickly become a mess if you neglect it. Open and close the faucet to see if everything is smooth and running. Now you are all done with installing shower plumbing fixtures. That was everything you needed to know about how to install a shower plumbing fixture. The process involves installation of the supply elbow, arm of the showerhead to the wall and then attaching the hose to both of them.